Product Overview edit high-pressure sound and light electroscope is a special tool to test the high-pressure line is electrified, electricity workers is one of the essential security tools, currently electroscope market a wide range of domestic species, uneven performance, or as a result of each species causes electroscope failure affecting the normal use. The general quality of the inspection electroscope test signal generator for the high frequency electronic boost signal generator, high-frequency and frequency there is a big difference, so the common test signal generator can not fully determine the electroscope good performance bad, even when the test is normal, electroscope may also be bad, it is not working. To solve these problems, at the request of many of the electricity sector, I plant developed a test signal generator frequency, completely eliminate the problem electroscope test failure. 2 Work to edit the product [ie, AC-powered and self-powered desktop] [handheld] are two types namely, AC-powered applicable to the case of electricity, through the regulator, step-up transformer to power frequency Boost to electroscope start voltage, self-powered generator that comes with its own rechargeable battery, through frequency inverter converts the DC power is converted into frequency, then boosted to electroscope start voltage boost to inspection electroscope good or bad performance. 3 performance parameters edit 1.10KV Output voltage: frequency 0-4KV (10KV starting voltage 1.5-4KV) 2.6-35KV Output voltage: frequency 0-12KV (35KV starting voltage 5.25-14KV) 3.6-110KV Output voltage: frequency 0-35KV (110KV starting voltage 16.5-44KV) 4.6-220KV Output voltage: frequency 0-60KV (220KV starting voltage 33-88KV) Note: Usually electroscope start voltage control range (0.15-0.3) times rated Voltage. Contact: Qi Shuo; Tel: 18332463496; QQ: 3260520587