Wireless high-pressure nuclear phase detector is based on the French high-pressure nuclear phase detector wireless improve the development. This product is made of high-quality imports of integrated circuits, stable and reliable. In figuring phase in preference to the French technique, using language prompt phase are the same. Wireless nuclear phase high-pressure main advantage is to remove the connecting two grid (power) at both ends of the leads (detection range of up to 10 meters), can pass through walls and partitions (board), without any way to limit the terrain and facilities architecture to improve the safety, operation is extremely convenient. Edit this section uses two grid check (Power) or two electrical systems A, B, C (yellow, green, red) three-phase are the same. No Edit this paragraph Features between the two measured phase (pole) cable connection, the signal can pass through the wall, language tips: Three phase are the same, in order to determine whether the grid. Edit this paragraph Technical parameters 1. Operating Temperature: -10 ~ 40 ℃ 2. Relative humidity: 10 m 4. The transmission frequency: 315MHz 5. Power: 9V laminated battery (emission, reception each one) 6. Quiescent Current: <1uA (transmit and receive) 7. Output: lighting (emitting means); language and lighting (receiver) 8. Language: the same phase (in-phase); Note that the phase is not the same (different phase) 9. Voltage rating: 6 ~ 10kV, 35kV, 110kV, 220kV, 330kV, 500kV Contact: Qi Shuo; Tel: 18332463496; QQ: 3260520587