Contact: Qi Shuo; Tel: 18332463496; QQ: 3260520587 Product Overview edit high-pressure sound and light electroscope is a test of the high-pressure line is electrified special tools, is one of the essential security tools electricity workers, the current domestic market electroscope wide range of uneven performance, or failures due to various causes electroscope affect normal use. The general quality of the inspection electroscope test signal generator for the high frequency electronic boost signal generator, high-frequency and frequency there is a big difference, so the common test signal generator can not fully determine the electroscope good performance bad, even when the test is normal, electroscope may also be bad, it is not working. To solve these problems, at the request of many of the electricity sector, I plant developed a test signal generator frequency, completely eliminate the problem electroscope test failure. 2 Work to edit the product [ie, AC-powered and self-powered desktop] [handheld] are two types namely, AC-powered applicable to the case of electricity, through the regulator, step-up transformer to power frequency Boost to electroscope start voltage, self-powered generator that comes with its own rechargeable battery, through frequency inverter converts the DC power is converted into frequency, then boosted to electroscope start voltage boost to inspection electroscope good or bad performance. 3 performance parameters edit 1.10KV Output voltage: frequency 0-4KV (10KV starting voltage 1.5-4KV) 2.6-35KV Output voltage: frequency 0-12KV (35KV starting voltage 5.25-14KV) 3.6-110KV Output voltage: frequency 0-35KV (110KV starting voltage 16.5-44KV) 4.6-220KV Output voltage: frequency 0-60KV (220KV starting voltage 33-88KV) Note: Usually electroscope start voltage control range (0.15-0.3) times rated Voltage. High frequency doubler circuit, use PWM technology and high-power IGBT devices. The use of negative feedback voltage, output voltage high stability, small ripple factor ≤1%. Smooth full scale voltage, the voltage regulator fineness regulation accuracy ≤0.5%, stability of ≤1%, voltage and current error of 1% (of reading ± 0.2kV), the current error ± 1 digit. Boost potentiometer from zero boost. 75% UDC1mA function buttons for easy MOA test, the accuracy of 1% of reading ± 1%. Overvoltage using DIP set, clear, error ± 1%. Doubler using new materials, light and strong. The outer coating special insulation materials, electrical properties, moisture resistance and strong. Folding Foot, large diameter area, good stability. Integrated design, high-voltage cables mopping leads to facilitate field trials. Contact: Qi Shuo; Tel: 18332463496; QQ: 3260520587