Contact: Qi Shuo; Tel: 18332463496; QQ: 3260520587 altimeter altimeter rod rod known as insulation altimeter rod, high-pressure altimeter pole, telescopic rod high pressure altimeter altimeter rod, insulation altimeter altimeter rod rod Altimeter rod telescopic retractable light pole high pressure altimeter altimeter altimeter rod rod epoxy resin and the like. Using high-quality glass fiber cloth, epoxy resin, phthalic anhydride and 306, fiberglass cloth and curing agent of several insulating material is used to measure the height of the wire, the line of cross-over distance. The product of the production process including: the first high temperature and the initial setting in the mold, and then remove the mold, after the second high-temperature grinding, a coarse grinding, fine grinding twice, and then painting the production cost goods. Altimeter pole Model: CGG series altimeter rod type: range finder altimeter altimeter pole insulated pole telescopic retractable light pole altimeter altimeter rod rod epoxy altimetry high pressure altimeter altimeter rod rod Specifications: 8 meters high pole measuring 10 meters high pole measuring 12 meters high pole measuring 15 meters high pole measuring. 8 m retracted to 1.5 m. There are five sections. An outer diameter of 39. The inner diameter of 21 .. 12 m to 1.55 m retracted. Nine points. 46. ??The outer diameter of the inner diameter of 16.15 meters to 1.6 meters retracted. 13. 50. The inner diameter of the outer diameter measured high pole Applied voltage: 220kv and below live line work. Altimeter rod production process: a full range of high pressure altimeter rod using the most advanced fiberglass insulation material production, bending capability has been greatly enhanced, sophisticated technology, compact structure, easy operation, accurate positioning, surface scale clear, with excellent mechanical and electrical properties , for a variety altimetry place under high pressure working conditions of use, the measurement error of less than 1cm. Altimeter rod using high-quality raw materials to produce the measuring rod, light weight, high strength, pressure is good, accurate scale advantages. Use Edit this paragraph to long folded correctly measured high pole Please read the instructions carefully. First, open the lever when using altimeter cap, tighten the hook on the finest section of the screw, and then pull out section by section, not to the fitting of the two can be a little harder, while rotating pull it out, let two the scale of the vertical alignment of the section until the semi-circular marks between two sections of a circle, and finally confirm whether the pop pin. Second, when you have finished using altimetry pars, left hand holding the bottom of the thickest section, thumbs down pin, right hand holding a thin section above, while rotating push back, followed by loosening two fitted at the section-by-section back. Third, the altimeter rod speaks hook screwed down, and put on the electroscope head, do electroscope lever to use. Contact: Qi Shuo; Tel: 18332463496; QQ: 3260520587